Whether you are looking to upgrade to a new bandsaw or interested in a reliable used machine, we are continually taking saws in on trade.
We refurbish used equipment and sell at significant savings from purchasing new. On The Cutting Edge is Colorado’s Premier Dealer for HEMSAW. Being a dealer for FS Curtis and Almig, we can accommodate your air compressor needs whether it be a small 5 HP recip FS Curtis, or a 200 HP Screw Drive Almig. See below for any used machinery available. If you don’t see availability on what you are looking for, give us a call. You can also browse new machinery by clicking HEMSAW, FS Curtis, or Almig logos below.
Hem Double Miter: 260 BSA – $8,700 – In Stock Denver, CO
Features
****NEW****
Double Miter: 260 BSA
Capacity: 10.2″ W x 5.9″ H 8.7″ (Round)
Miter: 5.9″ W x 5.9″ left @ 45°
Miter: 4.7″ W x 3.9″ right @ 45°
Miter: 3.5″ W x 2.4″ left @ 60°
Blade: 8’0-1/2″ x 1″ x .035″
Motor: 1.8 HP
Operation: Semi Automatic
Patented Hydraulic System
Dual 45 Degrees Miter
One-Way 60 Degrees Miter
Adjustable Feed Rate & Cutting Pressure
Hydraulic Adjustable Vise
2-Speed Motor
Hard-Stop Measuring Device
Moveable Control Console w/ 40″ Umbilical
Rugged 3/16″ Steel Base
Miter Scale
Heavy-Duty Sealed Pivot Bearing Point
Full Capacity Cutting Surface
Flood Coolant System
1.8 HP 220V (3-Phase) 2 Speed (106 / 216 SFPM)
1 Year Parts Warranty
Spare Parts Kit & In-Depth Manual
Used Ellis 1800 Mitre Bandsaw – $
Features
Used Powermatic Bandsaw – $
Features
Used DoAll 1612-0 $6,000
Features
DoAll 1612-0 1.5HP 2 speed gearbox
Rewired for 220 3 phase
Rebuild Gearbox – all new bearings, seals and fresh gear oil
Replaced lower drive wheel – new
Replaced all drive belts – primary, secondary, tach, and air pump
Replaced blade guides to 1”
Extra guides to include ½” and ¼”
New saw blade & 1 extra 5-8 TPI blade included
Replaced back-up guides and bearings
SOLD Marvel V-10A2PC $10,500.00
Features
SOLD
Specs: Marvel V-10A2PC Vertical, Tilt-Frame, Computerized, Automatic Indexing, Hydraulic Metal Cutting, High-Speed Band Saw
This is a fully automatic, computerized saw with the ability to “stack” automatic programs and run then concurrently. You can build a library of common cut lists (up to 100 programs) and keep them in memory to be accessed as needed.
Full 75-point service was completed Jan 2019
Service & New Parts:
Reset Hydraulic pump pressure. Drained and filled hydraulic tank with ISO 46 weight oil. Replaced hydraulic filter. Replaced hydraulic lines on shuttle and main vise. Replaced head feed bearings. Checked and set hydraulic pressures. Drained and filled gearbox with SHC634 synthetic oil. Installed new work lamp. Full head alignment. Greased all bearings and zerts. Re-set blade tension and tracking.
Specifications:
Capacity: 8”x12” or 8”x8” with blade at 45° (Right)
Voltage: 220 V 3 Phase
Speed Range: Infinitely variable, hydraulic, 50 to 300 FPM
3 HP Motor
Blade: 13’6” long x 1” wide
Coolant System: Built-in, motorized 32 gal. reservoir, chip pan and splash guards
Weight: 3,100 lbs.
Dimensions: 90” L x 65” W x 82” H
SOLD Used Hyd Mech S-20A Series II S#81199736
Features
SOLD
Wired for 220 3 phase
Full Automatic Computer Feed Saw (with optional MTA-100 controller)
Vertical hold downs on feed and main vise
Adjustable vise pressure 0-500 PSI
Full Miter 45 degrees one direction
13” x 18” Capacity at 90 degrees
12” Round @ 45 degrees
13’6” x 1” Saw Blade
3 HP Drive Motor with Variable Speed Control
Digital Blade Speed Readout
Recent Work Completed on saw:
Full 75 point preventative maintenance May 2021
Drained & Filled Hydraulic Tank w/ ISO 46 Hydraulic Oil
Replaced Hydraulic Filter
Replaced Hydraulic Pressure Gauge
Drained & Filled Gearbox w/ synthetic gear oil
New bearings in Idle Wheel
All new console switches installed
New Blade Guard
New Chip Brush Assembly
Replaced Guide Arm adjusters
Replaced Blade Speed Knob
Set for Correct Hydraulic Pressure
Full Head & Guide Alignment
Greased all bearings and zerts
Corrected Blade Tension
Repaired various hydraulic leaks
Replumbed coolant line
New Coolant Flow Valve
Guides and Backup Guides in good condition
Gearbox and Drive components in good condition
SOLD Almig Combi 8 Rotary Screw Air Compressor w/ integrated 132 gal tank and dryer $12,102.30
Features
****SOLD****
Almig Combi 8 Rotary Screw Air Compressor w/ integrated 132 gal tank and dryer
10HP 125psi @37cfm Wired 230v 3Phase
***In Stock***
***No Freight Charge***
***Full Warranty***
***Dimentions***
75” x 27” x 66”
***Weight***
1113lbs
***List***
$13,447.00
Less 10% Discount $ 1,344.70
Total $12,102.30
